General Firewall Screen; Services Screen - ZyXEL Communications NBG-416N User Manual

12.4 General Firewall Screen

Use this screen to enable or disable the NBG-416N's firewall, and set up firewall
logs. Click Security > Firewall to open the General screen.
Figure 79 Security > Firewall > General
The following table describes the labels in this screen.
Table 50 Security > Firewall > General
LABEL
Enable Firewall
Apply
Reset

12.5 Services Screen

Use the Services screen to enable or disable ICMP and VPN passthrough features.
Click Security > Firewall > Services. The screen appears as shown next.
Figure 80 Security > Firewall > Services
NBG-416N User's Guide
DESCRIPTION
Select this check box to activate the firewall. The NBG-416N performs
access control and protects against Denial of Service (DoS) attacks
when the firewall is activated.
Click Apply to save the settings.
Click Reset to start configuring this screen again.
Chapter 12 Firewall
123