Mac Filter - ZyXEL Communications NBG-416N User Manual

Table 30 Network > Wireless LAN > General: WPA-PSK/WPA2-PSK (continued)
LABEL
Group Key
Update Timer
Apply
Reset

6.5 MAC Filter

The MAC filter screen allows you to configure the NBG-416N to give exclusive
access to up to 16 devices (Allow) or exclude up to 16 devices from accessing the
NBG-416N (Deny). Every Ethernet device has a unique MAC (Media Access
Control) address. The MAC address is assigned at the factory and consists of six
pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to
know the MAC address of the devices to configure this screen.
NBG-416N User's Guide
DESCRIPTION
The Group Key Update Timer is the rate at which the AP (if using
WPA-PSK/WPA2-PSK key management) or RADIUS server (if using
WPA/WPA2 key management) sends a new group key out to all
clients. The re-keying process is the WPA/WPA2 equivalent of
automatically changing the WEP key for an AP and all stations in a
WLAN on a periodic basis. Setting of the Group Key Update Timer is
also supported in WPA-PSK/WPA2-PSK mode.
Click Apply to save your changes back to the NBG-416N.
Click Reset to reload the previous configuration for this screen.
Chapter 6 Wireless LAN
81