ZyXEL Communications NBG-416N User Manual page 99

Table 41 Network > WAN > Internet Connection: PPTP Encapsulation (continued)
LABEL
WAN MAC Address
Factory default
Clone the
computer's MAC
address
Set WAN MAC
Address
Apply
Reset
NBG-416N User's Guide
DESCRIPTION
The MAC address section allows users to configure the WAN port's
MAC address by either using the NBG-416N's MAC address, copying
the MAC address from a computer on your LAN or manually entering
a MAC address.
Select Factory default to use the factory assigned default MAC
Address.
Select this option to clone the MAC address of the computer
(displaying in the screen) from which you are configuring the NBG-
416N. It is advisable to clone the MAC address from a computer on
your LAN even if your ISP does not presently require MAC address
authentication.
Select this option and enter the MAC address you want to use.
Click Apply to save your changes back to the NBG-416N.
Click Reset to begin configuring this screen afresh.
Chapter 7 WAN
99