Setting Your Nbg-416N To Universal Repeater Mode - ZyXEL Communications NBG-416N User Manual

Chapter 4 Modes
4.4 Setting your NBG-416N to Universal Repeater
Mode
Connect your computer to the LAN port of the NBG-416N.
1
The default LAN IP address of the NBG-416N is 192.168.1.1 in router mode
2
(192.168.1.2 by default in non-router mode). In router mode, the NBG-416N can
assign your computer an IP address, so you must set your computer to get an IP
address automatically (computer factory default) or give it a fixed IP address in
the range between 192.168.1.3 and 192.168.1.254.
After you've set your computer's IP address, open a web browser such as Internet
3
Explorer and type the IP address of the NBG-416N as the web address in your web
browser.
Log into the Web Configurator. See the
4
how to do this.
Go to Maintenance > Sys OP Mode > General and select Universal Repeater.
5
Figure 33 Maintenance > Sys OP Mode > Universal Repeater
A pop-up window window appears providing information on this mode. Click OK in
6
the pop-up message window. Click Apply. Your NBG-416N is now in Universal
Repeater mode.
Note: Wait while the NBG-416N restarts, then log in to the Web Configurator again.
52
Chapter 2 on page 19
NBG-416N User's Guide
for instructions on