Usb Bracket, I/O Board - HP Chromebook x360 14 G1 Maintenance And Service Manual

USB bracket, I/O board

Table 5-9 USB bracket description and part number
Description
USB bracket
Before removing the USB bracket from the I/O board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the I/O board (see
Remove the USB bracket from the I/O board:
1. Remove the Phillips M2.0 × 4.0 screw (1) that secures the USB bracket to the I/O board.
2. Remove the bracket from the I/O board (2).
Reverse this procedure to install the USB bracket onto the I/O board.
34 Chapter 5 Removal and replacement procedures for authorized service providers
(Preparation for disassembly on page
Computer feet and bottom cover on page
Battery on page 22).
USB bracket, I/O board on page
Spare part number
L36909-001
20).
20).
34).