Selecting System Operation Mode; Figure 161 Ip Address In Ap Mode; Figure 162 Maintenance > Sys Op Mode > General; Figure 163 Maintenance > Sys Op Mode > General: Router - ZyXEL Communications ZyXEL NBG420N User Manual
Wireless n router
Hide thumbs
Also See for ZyXEL NBG420N:
- Specifications (2 pages) ,
- Quick start manual (85 pages) ,
- User manual (20 pages)
Table of Contents
Advertisement
Chapter 24 Sys Op Mode
Figure 161 IP Address in AP Mode
24.2 Selecting System Operation Mode
Use this screen to select how you connect to the Internet.
Figure 162 Maintenance > Sys OP Mode > General
If you select Router Mode, the following pop-up message window appears.
Figure 163 Maintenance > Sys Op Mode > General: Router
• In this mode there are both LAN and WAN ports. The LAN Ethernet and WAN Ethernet
ports have different IP addresses.
• The DHCP server on your device is enabled and allocates IP addresses to other devices on
your local network.
• The LAN IP address of the device on the local network is set to 192.168.1.1.
• You can configure the IP address settings on your WAN port. Contact your ISP or system
administrator for more information on appropriate settings.
If you select Access Point the following pop-up message window appears.
260
LAN
1 IP
Internet
NBG420N User's Guide
Advertisement
Table of Contents
Troubleshooting
