Overview Of Supported Security Features - Cisco 7965G Administration Manual

Chapter 1 An Overview of the Cisco Unified IP Phone
Table 1-2
Topic
Troubleshooting
Deleting the CTL file from the phone
Resetting or restoring the phone
802.1X Authentication for Cisco
Unified IP Phones

Overview of Supported Security Features

Table 1-3
7945G supports. For more information about these features and about Cisco Unified Communications
Manager and Cisco Unified IP Phone security, refer to Cisco Unified Communications Manager
Security Guide.
For information about current security settings on a phone, look at the Security Configuration menus on
the phone (choose Settings > Security Configuration and choose Settings > Device Configuration >
Security Configuration). For more information, see
Unified IP Phone."
Note Most security features are available only if a certificate trust list (CTL) is installed on the phone. For
more information about the CTL, refer to "Configuring the Cisco CTL Client" chapter in the Cisco
Unified Communications Manager Security Guide.
OL-12650-01
Cisco Unified IP Phone and Cisco Unified Communications Manager Security Topics
provides an overview of the security features that the Cisco Unified IP Phone 7965G and
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
Understanding Security Features for Cisco Unified IP Phones
Reference
See the "Troubleshooting Cisco
Unified IP Phone Security" section on
page 9-9
Refer to Cisco Unified
Communications Manager Security
Guide, Troubleshooting chapter
See the "Resetting or Restoring the
Cisco Unified IP Phone" section on
page 9-15
See the "Resetting or Restoring the
Cisco Unified IP Phone" section on
page 9-15
See these sections:
"Supporting 802.1X
•
Authentication on Cisco Unified
IP Phones" section on page 1-16
"802.1X Authentication and
•
Status" section on page 4-36
"Troubleshooting Cisco Unified
•
IP Phone Security" section on
page 9-9
Chapter 4, "Configuring Settings on the Cisco
1-11