Folding - Xerox 4595 User Manual

2. C op y
2 - 7 8
Auto
Automatically determines whether the copies should be output
facing up or down.
Face Up
Copies are output facing up and delivered from the last page.
Face down
Copies are output facing down and delivered from the last page.
Face Up Reverse Order
Copies are delivered from the first page facing up.
NOTE: Whether Face Up Reverse Order is displayed depends
on the system setting. For how to display it, refer to the System
Administration Guide, Chapter 9 Setups, "Copy Mode Settings."

Folding

You can make copies to be folded in half or in thirds.
KEY POINT: An optional package is necessary for this selection.
For more information, contact the Customer Support Center.
KEY POINT: The orientation of documents is limited to short-edge
feed; therefore, you must select a paper tray set with short-edge
feed stock.
From the Output Format tab, select Folding.
1.
Select any item.
2.
Select Save to keep your choices.
3.
None
A copy is not folded.
Z Tri-Fold
Copies are folded in three out.
C Tri-Fold
X er o x 4 5 95 C op i e r /P r i n te r U s er G ui d e