Xerox 4595 User Manual page 471

Item
Setting item
number
Printing mode 403
Sorting 404
Layout 405
Paper size 406
Color mode 407
X er o x 4 5 95 Co pi e r /P r i n te r U s e r G u i de
Selects whether to give priority to printing quality or speed.
[0] (default) : Standard
[1] : High Speed
[2] : High Quality
The Standard setting prints with a standard speed and quality.
The High Speed setting prints with priority given to speed.
The High Quality setting reduces the printing speed, but gives priority to
quality, resulting in better printing.
Selects whether to print multiple copies collated (1, 2, 3...1, 2, 3...).
[0] (default) : No
[1] : Yes
This section describes the layout when printing.
The setting of this item is only valid when [Print Processing Mode] is set
to [PDF Bridge].
[0] (default) : Auto Reduce/Enlarge
[1] : Booklet
[2] : Two-up
[3] : Four-up
[4] : 100% (actual size)
The Auto Reduce/Enlarge setting automatically prints with the
magnification adjusted to fit the paper size being printed. It automatically
selects A4 or letter size from the original size in the PDF file, and prints
accordingly.
The Booklet setting performs duplex printing with the page imposition
such that, according to the pagination of the PDF file to be printed, the
result is a booklet. Depending on the pagination, however, a booklet print
may not always be possible. In this case, it is printed at setting [0] (Auto
Reduce/Enlarge).
If there is no duplex feature, the document is printed 1 sided.
When [Paper Size] is set to [A4], printing is on A4 size paper.
When [Paper Size] is set to [Auto], printing is on A3 or A4 paper.
The Two-up setting prints two pages on each sheet of paper. When Two-
up is selected, the paper size is fixed at A4.
The Four-up setting prints four pages on each sheet of paper. When
Four-up is selected, the paper size is fixed at A4.
Sets the paper size for printing.
[0] : Auto
[1] (default) : A4
The Auto setting automatically determines the paper size, according to
the original size of the PDF file to be printed and settings.
Selects color printing or black and white printing.
[0] (default) : Auto
[1] : Black and white
The Auto setting automatically determines for each page of the original
whether it is color or black and white. If colors other than black and white
are used, then it is printed in color, and if black and white only are used,
black and white printing is used.
1 2. Sp ec i f ic a t io n s
Setting values
12-17