Xerox 4595 User Manual page 127

Step 3 Start the Scan Job
X er o x 4 5 95 Co pi e r /P r i n te r U s e r G u i de
Specify the mailbox where the scan will be saved.
4.
5. If appropriate, select features to configure from each tab.
Press the Start button.
1.
NOTE: If a problem occurs, an error message appears on the
display. Remedy the error by following the message on the
display.
If You Have More Documents
If you have more than one stack of documents to scan, select the
Next Original button on the touch screen while the current stack
of documents is being scanned. This allows you to scan several
documents as one set of data.
NOTE: The Build Job feature must be enabled and switched on.
Up to 999 pages can be stored.
NOTE: If the number of document pages exceeds this maximum,
then scanning stops. Follow the displayed message, and either
abort the operation, or save the scanned document data.
3 . S c an
Start
3-7