Xerox 4595 User Manual page 370

11 . P r ob l e m S ol v i n g
Symptoms
An error
message is
displayed after
paper is loaded
in paper Tray 5
(Bypass) and the
Start button is
pressed.
Documents are
often jammed.
A corner of the
document is
folded.
Stapler faults
11 - 8
Check
Check the position of the
paper guides at the front
side of paper Tray 5
(Bypass).
Is the right type of document
used?
Are you trying to copy
irregular shaped
documents, business cards,
transparencies, or thin
documents?
Are you trying to copy
documents affixed with
sticky labels, paper clips or
adhesive tape?
Are the document guides at
the correct position?
Is part of the document
ripped, and a piece of paper
remaining in the document
feeder?
When importing originals of
different sizes, is the
Mixed Size Originals
setting set to ON?
Is an A5-size document
loaded horizontally ( ) on
the document feeder when
the Mixed Size Originals
feature is in use?
Is the document curled?
–
Remedy
Set the paper guides to the correct
positions.
Refer to "Load paper in Tray 5 (Bypass)"
on page 7-6.
Properly load a document that can be
handled by the document feeder.
Refer to "Step 1 Load Documents" on
page 2-1.
Remove sticky labels, paper clips or
adhesive tape from the document before
copying.
Properly set the document guides.
Refer to "Step 1 Load Documents" on
page 2-1.
Open the document feeder cover and
check inside.
Refer to "Document Jams" on page 11-80.
Set Mixed Size Originals to ON.
Refer to "Mixed Size Originals" on page 2-
35.
Load the A5-size document vertically ( ).
Flatten out the curl and load the document
again.
Refer to "Stapler Faults" on page 11-84.
X er o x 4 5 95 C op i e r /P r i n te r U s er G ui d e