Xerox 4595 User Manual page 144

3. Sc a n
3- 2 4
Specify a Job Template.
2.
Job Template
Select a Job Template that is configured with the scan parameters
you want. Select the up and down buttons to navigate between
screens.
Go to
Entering a Job Template Number via the numeric keypad causes
that Job Template to appear at the top of the list.
Template Description
You can display a description of the Job Template.
Lighten/Darken
For more information, refer to "Lighten/Darken" on page 3-29.
Output Color (with optional Color Scanner Kit only)
For more information, refer to "Output Color (optional Color
Scanner Kit only)" on page 3-29.
2 Sided Originals
For more information, refer to "2 Sided Originals" on page 3-30.
Original Type
For more information, refer to "Original Type" on page 3-32.
File Format
For more information, refer to "File Format" on page 3-33.
Template Description
You can display a description of the Job Template. However, a
description only appears if it has been set when the Job Template
was created.
Select the Job Template, and select Template Description.
X er o x 4 5 95 C op i e r /P r i n te r U s er G ui d e