Xerox 4595 User Manual page 375

Symptoms
White areas or
stripes appear.
The entire page
is printed faint.
Paper becomes
wrinkled.
Text is blurred.
X er o x 4 5 95 Co pi e r /P r i n te r U s e r G u i de
Check
Is the paper damp?
The paper in use is
unsuitable.
When the print was made
using Tray 5 (Bypass), the
size and type of the actually
loaded paper differed from
the setting on the print
driver.
Two or more sheets may be
feeding at once.
The paper in use is
unsuitable.
Paper is being added while
it is being fed.
Is the paper damp?
Remedy
Replace with paper from a new ream.
Refer to "Load paper in the trays" on
page 7-4.
Load suitable paper.
Refer to "Load paper in the trays" on
page 7-4.
Either load paper of the correct size and
type into Tray 5 (Bypass), or fan the paper
thoroughly before loading it again.
Refer to "Load paper in Tray 5 (Bypass)"
on page 7-6.
Fan the paper well and reset.
Refer to "Load paper in the trays" on
page 7-4.
Replace with paper from a new ream.
Refer to "Load paper in the trays" on
page 7-4.
11 . P r o b le m S o l vi n g
11-13