Xerox 4595 User Manual page 414

11 . P r ob l e m S ol v i n g
Paper Jams in Tray 5 (Bypass)
11 - 5 2
The following section describes how to remedy paper jams that
occur on Tray 5 (Bypass).
1. When optional high capacity feeder tray is not installed, open
the top cover of paper Tray 5 (Bypass).
Remove the jammed paper and all paper loaded in paper Tray
2.
5 (Bypass).
KEY POINT: When two or more sheets of paper are loaded,
remove all of the sheets from the tray.
NOTE: If paper is torn, check for any torn pieces of paper inside
the machine.
Fan the paper you removed making sure that all four corners
3.
are neatly aligned.
Insert the paper into the tray with the printing side facing up
4.
until its leading edge lightly comes up against the paper feed
entrance.
X er o x 4 5 95 C op i e r /P r i n te r U s er G ui d e