Xerox 4595 User Manual page 395

Category
Error Code
C P S M O
016-220
016-221
016-222
016-223
016-224
016-225
016-226
016-227
016-228
016-450
016-454
016-503
016-504
016-505
016-701
016-702
X er o x 4 5 95 Co pi e r /P r i n te r U s e r G u i de
Cause and Remedy
An error occurred in the document scanner.
Cause
Power-cycle the machine. If the document scanner error
Remedy
is not corrected by performing the relevant remedy,
contact the Customer Support Center.
The SMB host name already exists.
Cause
Change the host name.
Remedy
For information about network settings, refer to the System
Administration Guide.
Unable to retrieve IP address from DNS.
Cause
Check the DNS configurations and IP address retrieve
Remedy
method.
For information about network settings, refer to the System
Administration Guide.
Unable to resolve SMTP server name during E-mail
Cause
send.
Check that the SMTP server settings from CWIS are
Remedy
correct. Also, check the DNS server settings.
Unable to resolve POP3 server name during E-mail
Cause
send.
Check that the POP3 server settings from CWIS are
Remedy
correct. Also, check the DNS server settings.
Unable to login to POP3 server during mail send.
Cause
Check that the user name and password used in the
Remedy
POP3 server from CWIS are correct.
PCL print data could not be processed as there was
Cause
insufficient memory.
Reduce resolution, cancel 2 Sided printing or N up, and
Remedy
try to print again.
Refer to the online help for the print driver.
PCL print data could not be processed as there was
Cause
insufficient print page buffer.
Take one of the following actions:
Remedy
Set Print Mode to Speed Priority.
Use Ensure Print.
Increase the size of the print page buffer.
Add on memory.
For information about print modes and print guarantees, refer to the
online help for the print driver. For information about memory, refer
to "Allocate Memory" in the System Administration Guide.
11 . P r o b le m S o l vi n g
11-33