Xerox 4595 User Manual page 397

Category
Error Code
C P S M O
016-713
016-714
016-716
016-718
016-719
016-720
016-721
016-722
016-723
016-728
016-729
X er o x 4 5 95 Co pi e r /P r i n te r U s e r G u i de
Cause and Remedy
The password set to the mailbox and the inputted
Cause
password were not in agreement.
Enter the correct password.
Remedy
Specified mailbox did not exist.
Cause
Create a mailbox or specify the existing mailbox.
Remedy
Unable to spool TIFF file because of insufficient disk
Cause
space.
Remove unnecessary documents and users stored on
Remedy
the printer and then attach the hard disk. When attaching
a hard disk, contact the Customer Support Center.
Refer to "Delete Documents in the Scan & Other Jobs Mailbox" on
page 4-69.
PCL print data could not be processed as there was
Cause
insufficient memory.
Reduce resolution, cancel 2 Sided printing or N up, and
Remedy
try to print again.
PCL print data could not be processed as there was
Cause
insufficient memory.
Increase the size of the print page buffer.
Remedy
The PCL print data included a command which cannot
Cause
be processed.
Confirm the print data and try to print again.
Remedy
An error occurred during print processing. Probable
Cause
causes are as follows:
1. Printing was instructed by Automatic Tray
Selection when Paper Type Priority is set to
Automatic Tray switching Off for all paper in the
Common Settings.
2. ESC/P command error
For 1, when printing by Automatic Tray Selection, set
Remedy
one of the paper types to a setting other than
Automatic Tray switching Off in Paper Type Priority.
For 2, check print data.
Refer to "Paper Type Priority" in the System Administration Guide.
Unsupported staple position is specified.
Cause
Confirm the position, and specify the print data again.
Remedy
Unsupported punch position is specified.
Cause
Confirm the position, and specify the print data again.
Remedy
An unsupported tag was included in the TIFF file.
Cause
Check the print data.
Remedy
Refer to "Scan Options" on page 3-38.
Unable to print because the number of colors/resolution
Cause
of the TIFF file exceeds the allowed range.
Change the number of colors/resolution for the TIFF file,
Remedy
and specify the print data again.
Refer to "Scan Options" on page 3-38.
11 . P r o b le m S o l vi n g
11-35