Fingerprint Module - Toshiba Satellite A130 Maintenance Manual

4 Replacement Procedures

4.19 Fingerprint Module

Removing the Fingerprint Module
To remove the Fingerprint Module, first remove the battery pack, keyboard, and top cover, and
then follow the steps below:
1. Remove four M2.0x2.3 black screws securing the Fingerprint Module Bracket to the rear side
of the top cover.
Figure 4-57 Removing the fingerprint module bracket screws
2. Remove the bracket.
Figure 4-58 Removing the fingerprint module bracket
4-50 Satellite A130/ A135 Series Maintenance Manual