Toshiba Satellite A130 Maintenance Manual page 151

4 Replacement Procedures
6. Lift and remove the keyboard.
Figure 4-35 Removing the keyboard
Installing the Keyboard
To install the keyboard, follow the steps below and refer to the figures in the preceding section.
1. Connect the keyboard cable to the system board.
2. Place the keyboard on the top cover, insert under the center tab, and secure it with two black
M2.5x3 screws.
3. Set the strip cover and press down to secure the strip cover until the latches engage.
Satellite A130/ A135 Maintenance Manual 4-33