Table of Contents
Advertisement
3.
Remove the FL inverter board.
Installing the FL Inverter Board
To install the FL inverter board, follow the steps below and refer to the figure in the preceding
section.
1.
Place the FL inverter board on the LCD module.
2.
Secure one M2x3 black screw connecting the FL inverter board to the LCD display
assembly.
3.
Connect the two connectors on either side of the board.
Satellite A130/ A135 Maintenance Manual
Figure 4-45
Removing the FL inverter board
4 Replacement Procedures
4-41
- Quick Links:
- Hardware Overview
- Inch Hard Disk Drive
- Rtc Battery
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
Related Manuals for Toshiba Satellite A130
Related Products for Toshiba Satellite A130
- Toshiba A130-ST1312
- Toshiba A130-ST1311
- Toshiba A135-S2246 - Satellite - Celeron M 1.73 GHz
- Toshiba A135-S4467 - Satellite - Core 2 Duo 1.6 GHz
- Toshiba A135-S4477 - Satellite - Core 2 Duo 1.6 GHz
- Toshiba A135-S2326 - Satellite - Celeron M 1.6 GHz
- Toshiba A135S4527 - Satellite - Pentium Dual Core 1.73 GHz
- Toshiba A135-S2426 - Satellite - Celeron M 1.73 GHz