4.11 Fingerprint module
Removing the fingerprint module
To remove the fingerprint module, follow the steps below and refer to Figures 4-21 to
4-23.
1.
Disconnect the cable.
2.
Remove the following screws then remove the bracket.
M23.5L
M23L
3.
Remove the following screws and then take the fingerprint and led board away
M23.5L
4-36
FLAT HEAD screw
FLAT HEAD screw
Figure 4-21 Removing the bracket
FLAT HEAD screw
[CONFIDENTIAL] SatelliteM500/M500D Maintenance Manual
4 Replacement Procedures
4
2
M2X3
4