Toshiba Satellite A130 Maintenance Manual page 144

4 Replacement Procedures
3. Carefully lift the unit from its connector.
Figure 4-27 Removing the modem module
Installing the Modem
To install a modem, follow the steps below and refer to the figures in the preceding section.
1. Connect the modem connector on the system board to the modem module.
2. Fit the modem onto its connector and secure it with two black M2.5x3 screws.
3. Install the wireless LAN card on top of modem and then replace the M2.5x5.4 screw to fix
the WLAN cover.
4-26 Satellite A130/ A135 Series Maintenance Manual