Lcd Module - Toshiba Satellite A130 Maintenance Manual

4 Replacement Procedures

4.15 LCD Module

Removing the LCD Module
To remove the LCD module, first remove the display assembly, display mask, and FL inverter
board and then follow the steps below.
1. Lift the LCD module from the top chassis.
2. Remove six M2x3 screws securing the LCD module bracket to the LCD module.
NOTE: If the LCD module malfunctions, remove the LCD cable and LCD bracket. Then
replace the whole LCD module unit.
4-42
Figure 4-46 Removing the LCD Module
Figure 4-47 Removing the bracket screws
Satellite A130/ A135 Series Maintenance Manual