Toshiba Satellite A130 Maintenance Manual page 165

4. Lift off the top cover.
Installing the Top Cover
To install the top cover, follow the steps below and refer to the figures in the preceding section.
1. Seat the top cover, and secure the speaker cables, finger print unit FFC cable, touch pad unit
FFC cable, and the Function Button cable to the system board.
2. Secure the top cover with three M2.5x6 black screws.
3. Turn the computer upside down and secure the 16 screws to the rear panel.
Satellite A130/ A135 Maintenance Manual
Figure 4-53 Removing the top cover
4 Replacement Procedures
4-47