Fl Inverter Board - Toshiba Satellite A130 Maintenance Manual

4 Replacement Procedures

4.14 FL Inverter Board

Removing the FL Inverter Board
To remove the FL inverter board, first remove the battery pack, display assembly, and display
mask; then follow the steps below.
1. Remove the M2x3 black screw securing the FL inverter board to the LCD display assembly.
2. Disconnect the two connectors on either side of the board.
4-40
Figure 4-43 Removing the screws
Figure 4-44 Removing the connectors
Satellite A130/ A135 Series Maintenance Manual