Optical Drive Module - Toshiba Satellite A130 Maintenance Manual

4.9

Optical Drive Module

Removing the Optical Drive Module
To remove the optical drive module, you need to remove the expansion memory module cover
first as described in the previous section. Follow the steps below:
1. Turn the computer upside down.
2. Remove the battery and the expansion memory module cover.
3. Remove the black M2.5x8 screw securing the optical drive module.
4. Use your hand to push the module bracket and then slide the module from the bay.
Satellite A130/ A135 Maintenance Manual
Figure 4-28 Removing the optical drive screw
Figure 4-29 Removing the optical drive module
4 Replacement Procedures
4-27