Toshiba Satellite A130 Maintenance Manual page 169

3. Remove the Fingerprint module by lifting it gently.
Installing the Fingerprint Module
To install the Fingerprint Module, follow the steps below and refer to the figures in the preceding
section:
1. Turn the top cover upside down and place the Fingerprint Module and the Fingerprint
Module Bracket in position on top.
2. Secure the Fingerprint Module bracket with four M2.0x2.3 black screws.
Satellite A130/ A135 Maintenance Manual
Figure 4-59 Removing the fingerprint module
4 Replacement Procedures
4-51