Toshiba Satellite A130 Maintenance Manual page 161

3. Turn over the LCD screen and remove the tape securing the LVDS cable. Detach the LVDS
cable.
Installing the LCD Module
To install the LCD module, follow the steps below and refer to the figures in the preceding
section.
1. Secure the LVDS cable to the LCD module.
2. Seat the LCD module in the display assembly with the LCD module bracket and secure it
with six M2x3 black screws. Note the L and R markings to make sure that the bracket arms
are secured on the correct side.
3. Seat the LCD module with bracket on the chassis.
4. Arrange the LVDS cable in the chassis.
Satellite A130/ A135 Maintenance Manual
Figure 4-48 Removing the LVDS cable
4 Replacement Procedures
4-43