4.10 Optical Drive
This computer may be fitted with a:
Disassembling the Optical Drive
To disassemble the optical drive, first remove the drive from its module bay as described in the
previous section.
Next, release the two M2x3 screws from the bracket plate and remove the bracket plate.
NOTE: The small arrow shown on the metal bracket indicates the top side of the optical
bracket. Keep this in mind when removing or installing the drive.
Satellite A130/ A135 Maintenance Manual
DVD-ROM device
CD-RW/DVD-ROM combo device
DVD Super Multi device
Figure 4-30
Removing the optical drive bracket
4 Replacement Procedures
4-29