Display Assembly - Toshiba Satellite A130 Maintenance Manual

4 Replacement Procedures

4.12 Display Assembly

Removing the Display Assembly
To remove the display assembly, first remove the battery and any optional devices. Also remove
the keyboard, and the wireless LAN unit as described in the previous sections. Then follow the
steps below:
1. Separate the wireless LAN antenna connectors (black and white) from the top cover and
place them on a side out of the way. Also remove the Bluetooth antenna connector (peach)
from the module.
2. Disconnect the black LCD power (LVDS) cable, Bluetooth cable, and wireless LAN cable
from the system board.
4-34
Figure 4-36 Disconnecting cables
Satellite A130/ A135 Series Maintenance Manual