Replacement Procedures
4
4.9 Display assembly
Removing the display assembly
The following describes the procedure for removing the display assembly (See Figure 4-13 to
4-17).
1. Close the display and turn the computer upside down.
2. Open the MINIPCI Door and remove the wireless LAN screws and antenna connector.
Satellite U300 and Satellite Pro U300 Maintenance Manual (960-Q08)
Downloaded from
www.Manualslib.com
Figure 4-13 Removing the screws (securing display assembly)
manuals search engine
M2.0x3.0 FLAT BIND
(Locktight)
4-28