Optical Drive Module - Toshiba Satellite A210 Series Maintenance Manual

4.7 Optical Drive Module

Removing the Optical Drive Module
To remove the optical drive module, you need to remove the expansion memory module
cover first as described in the previous section. Follow the steps below:
1. Turn the computer upside down.
2. Remove the battery and the expansion memory module cover.
3. Remove the black M2x3 screw securing the optical drive module.
Figure 4-17
4. Use your finger or a flat blade screwdriver to push out on the module bracket and then
slide the module from the bay.
Figure 4-18
Satellite A210/ A215, Satellite Pro A210, EQUIUM A210, SATEGO A210 Series Maintenance Manual
Removing the optical drive screw
Removing the optical drive module
4-19
4 Replacement Procedures