Connecting The Power Cord - Fujitsu PRIMERGY RX600 S6 Operating Manual

Hardware installation
4.4.2

Connecting the power cord

Ê Connect the power cord to the server power supply unit.
Ê Secure the power cords in the cable clamps so the insulated connectors
cannot be disconnected from the server accidentally.
Figure 6: Cable clamps to secure the power cords
Ê Thread the cable through the cable clamp as shown in
Ê Pull the cable clamp tight to secure the power cord.
Now the insulated connector cannot be disconnected from the server
accidentally.
I
You can loosen the cable clamp by opening the small locking lever.
Ê Connect the mains plug to a grounded mains outlet in the in-house power
supply network or a power outlet of the socket strip in the rack (see Technical
Manual for the rack).
54 Operating Manual
figure 6.
RX600 S6