Installing Sfp+ Transceiver Modules - Fujitsu PRIMERGY RX600 S6 Operating Manual

Ê Reattach the protective optical port plug to the transceiver optical bores.
I
Place the removed SFP+ transceiver module in an antistatic bag or
other protective environment.
8.2.3.2

Installing SFP+ transceiver modules

Figure 38: Removing the protective optical port plug
Ê Remove the SFP+ transceiver module from its protective packaging.
Ê Remove the optical port plug from the new / additional SFP+ transceiver
module.
V
CAUTION!
– Always keep the protective port plugs attached to the transceiver
optical bores and fiber-optic cable connectors until you are ready
to make a connection.
– Save the protective port plug for future use.
RX600 S6
Operating Manual
CSS components
121