Hot-Plug Expansion Cards - Fujitsu PRIMERGY RX600 S6 Operating Manual

8.1.4

Hot-plug expansion cards

V
CAUTION!
The actions described in this section may only be performed by
●
personnel with the appropriate technical training. (The device can be
seriously damaged if it is opened without authorization or if repairs
are attempted by untrained personnel.)
Each slot in the server must have either an expansion card or a
●
dummy module. A dummy module comprises a retaining plate with an
attached removal tool.
Please observe the safety information in
●
information" on page
The following operations are possible during operation:
Replacement of expansion cards (see
●
card" on page 103
I
Only expansion cards of the same type and with the same settings
may be exchanged. If the expansion cards do not match, the new
expansion card will not be commissioned.
Adding more expansion cards (see
●
page 106 and
Ê You should read the accompanying documentation supplied with the
expansion card beforehand.
RX600 S6
27.
and "Installing a hot-plug expansion card" on page
"Installing a hot-plug expansion card" on page
Operating Manual
chapter "Important
"Removing a hot-plug expansion
"Removing a dummy module" on
CSS components
107)
107)
101