Table of Contents
Advertisement
Starting up and operation
5.3
Configuring the server
This section contains information about configuring the server and installing the
operating system.
I
Make sure that the energy saving functions are disabled in the BIOS
Setup during server operation.
5.3.1
Configuring the SAS/SATA RAID controller card
The server comes with a SAS/SATA RAID controller with "MegaRAID
functionality". You can configure the SAS/SATA RAID controller either before or
during installation with the ServerView Installation Manager. Using the
ServerView Installation Manager is recommended.
I
A separate utility is available to the controller for MegaRAID
configuration. For further information, refer to the "SAS Software User's
Guide" (on the ServerView Suite DVD 2 under Industry Standard Servers -
Expansion Cards - Storage Adapters - LSI Configuration Software).
Further information on modular RAID controllers is provided in the
"Modular RAID Controller Installation Guide" (on the ServerView Suite
DVD 2 under Industry Standard Servers - Expansion Cards - Storage Adapters
- LSI RAID / SCSI Controllers).
I
Descriptions of operating systems not covered in the controller manual
are provided in the corresponding readme files on the driver CDs.
72
Operating Manual
RX600 S6
Advertisement
Table of Contents
