Hdd/Ssd Module And Dummy Module - Fujitsu PRIMERGY RX600 S6 Operating Manual

CSS components
Always set the HDD/SSD module down carefully, with the large surface
●
facing downwards to prevent it from tipping over.
8.1.3.1

HDD/SSD module and dummy module

Figure 18: 2.5-inch HDD module and dummy module
1 Dummy module
2 Tabs for unlocking the dummy module
3 HDD/SSD module (installation frame with hard disk drive or solid state
disk installed)
4 Indicators:
HDD/SSD Busy (LED green)
HDD/SSD Fault (LED orange)
For description see section
modules" on page
5 Handle for locking and unlocking the HDD/SSD module
6 Button for locking and unlocking the handle
7 Ridge for applying a sticker with the current drive name and drive size
96
"Indicators on the hot-plug HDD/SSD
62.
Operating Manual
RX600 S6