List Of Ldap Settings - Konica Minolta bizhub 25e Administrator's Manual

„ List of LDAP settings
Item
Name
LDAP Server Address
Port Number
Authentication Method
MB User Login
Account ID
Password
Search Base
MaxNumber of results
Time Limit
Optional Setting
Additional Attribute Enter the search condition attribute to add.
Additional String
Search Method
Description
This is the button name displayed on the screen. Up to 23
characters can be entered.
If nothing is registered, the first 23 characters of the LDAP
server address is displayed instead.
Enter the name or IP address of the LDAP server to register.
Up to 99 characters can be entered.
Enter the port number of the LDAP server.
A number between 0 and 65535 can be set, and the default
value is 389.
Select the authentication method to log in to the LDAP server
from [Anonymous], [Simple] or [DIGEST-MD5].
The authentication method must match that used in the LDAP
server.
If [Anonymous] is selected, [OB User Login], [Account ID],
and [Password] can be omitted.
Set whether to use the Message Board user information when
a login is required to access the LDAP server.
When this setting is enabled, if you register the LDAP server
authentication account and password in the user registration
of Message Board, it is not necessary to enter an account and
password at LDAP searching.
If [OB User Login] is set to ON, [Account ID] and [Password]
can be omitted.
This setting is required when the authentication method is set
to Simple or Digest-MD5, and OB User Login is set to OFF.
If you do not register an account ID, the system prompts you
to enter the account ID at LDAP searching.
Up to 49 characters can be entered.
This setting is required when the authentication method is set
to Simple or Digest-MD5, and OB User Login is set to OFF.
If you do not register a password, the system prompts you to
enter the password at LDAP searching.
Up to 29 characters can be entered.
Enter the starting search position of the LDAP server.
Up to 99 characters can be entered.
Set how many search results to display. An error is displayed
when the number of search results exceeds the maximum.
A number between 1 and 100 can be set, and the default value
is 50.
Set the maximum amount of time until the search results
are displayed. An error is displayed when the time taken for
search results exceeds the maximum. A number between 0 and
9999 seconds can be set for the time, and the default value is 0
(unlimited).
You can add search conditions to the parameters.
Up to 49 characters can be entered.
Enter the search condition value to add.
Up to 99 characters can be entered.
Select the search method.
Specifying the network settings
1
2
2-23