Konica Minolta bizhub 25e Administrator's Manual page 55

„ Editing / deleting the protect passcode
1
Press [Setting] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until My MFP Menu
screen is displayed.
2
Press [Management].
3
If an administrator password is set, enter the password and press [Enter].
If an administrator password is not set, proceed to step 4.
4
Press [Protect Passcode].
5
Enter the current protect passcode using the numeric keys, and press [Enter].
6
Enter the new passcode using the numeric keys, and press [Enter].
To delete the protect passcode, enter "0000" using the numeric keys, and press [Enter].
2-8 Setting security codes