Konica Minolta bizhub 25e Administrator's Manual page 105

Symptom
Blank spots are
printed
PRINTER
PRINTER
PRINTER
PRINTER
PRINTER
PRINTER
The paper comes out
wrinkled
The entire printout is
dirty
PRINTER
The edges of the paper
are dirty
PRINTER
The image is slanted
4-6 Troubleshooting
Cause
Is paper other than that
specified in manuals of the
machine being used?
The ADF glass is dirty.
Is paper other than that
specified in manuals of the
machine being used?
The paper is damp.
Is the paper loaded
properly?
The document glass is
dirty.
The rear side of a duplex
printed document shows
through on the front side.
The document pad is dirty. Clean the document pad
The document is not loaded
correctly.
The document is not
suitable for loading in the
ADF.
Is there anything on the
ADF glass?
Is the paper loaded
properly?
Countermeasure
Use an appropriate type of paper
Clean the ADF glass (page
Also, clean the charging needle
Use an appropriate type of paper
Replace the paper with new paper. For
details, see "Loading paper" in the User's
Guide.
Load the paper properly. For details, see
"Loading paper" in the User's Guide.
Clean the document glass
Also, clean the charging needle
When making duplex copies of a thin
document, the rear side of the document
may be scanned and printed onto the front
document. Lighten the contrast. For details,
see chapter 2, "Advanced copy functions" in
the Copier Guide, chapter 2, "Advanced scan
functions" in the Scanner and Fax Guide, and
chapter 3, "Basic transmission settings" in
"Basic faxing" in the Scanner and Fax Guide.
Also, clean the charging needle
Load the document correctly. For details, see
"Basic operation" in the User's Guide.
Use a document that can be loaded in the
ADF. For details, see "Acceptable documents"
(page 5-11).
Clean the ADF glass (page
Also, clean the charging needle
Load the paper properly. For details, see
"Acceptable documents" (page
(page 5-9).
3-10).
(page 3-12).
(page 5-9).
(page 3-10).
(page 3-12).
(page 3-10).
(page 3-12).
3-10).
(page 3-12).
5-11).