Konica Minolta bizhub 25e Administrator's Manual page 67

„ List of TCP/IP settings
You can set the settings for using the machine on a network. The following items can be
set.
Item
Host Name
Workgroup
DNS Server Addresses
DNS Suffix
Obtain IP address
IP Address
Subnet Mask
Default Gateway
WINS Server Address
IPv6 Setting
2-20 Specifying the network settings
Enter the host name of the machine.
The default setting is the MAC address, and up to 15 characters
can be entered. You cannot enter "*" at the start of a name.
Enter the workgroup name of the network the machine is
connected to.
The default setting is "WORKGROUP", and up to 15 characters
can be entered. You cannot enter "*" at the start of a name.
NOTE
•The domain name cannot be used as the workgroup name.
•If there is no workgroup on the network, create a new
workgroup. In that case, contact your network administrator.
When using a DNS server, enter the primary DNS server
address and the secondary DNS server address.
To perform name resolution using only a host name, register the
DNS suffix.
Enable the setting to automatically obtain the IP address of your
machine using a DHCP server.
NOTE
•If the power is left OFF for an extended period, the IP address
may be disabled.
•The IP address and subnet mask assigned by the DHCP server
cannot be changed.
•If you do not want to use a DHCP server, disable the DHCP
settings, and manually assigned the IP address and subnet
mask.
When you do not obtain the IP address automatically, enter the
IP address of your machine.
NOTE
If "Obtain IP address" is enabled, you cannot display or edit the
IP address.
When you do not obtain the subnet mask automatically, enter
the subnet mask of your machine.
NOTE
If "Obtain IPaddress" is enabled, you cannot display or edit the
subnet mask.
If you are using a gateway, enter the gateway address.
If you are using a WINS server, enter the WINS server address.
IPv6 Setting
You can set the following settings:
• Obtain IPv6 address
• Link Local Address
• Global IP Address
• Subnet Prefix Length
• Default Gateway
For details on the IPv6 settings, see chapter 3, "Setting the
connection environment" in the Message Board Guide.
Description