Konica Minolta bizhub 25e Administrator's Manual page 65

Function
e-mail Gateway You can transmit documents to an e-mail gateway (fax
Authentication
Method
Delete
Restriction
Settings
Scan to Print
Clear
Initialize
Service Setting
Network
Connection
NOTE
Underlined values are the default settings specified at the time of shipment.
2-18 Specifying the network settings
Description
server).
For details, see "Setting an e-mail gateway" (page
Setting

You can specify the default setting.
Prefix

Enter the prefix for the local part of the e-mail address.
Up to 32 characters can be entered.
Suffix

Enter the suffix for the local part of the e-mail address.
Up to 48 characters can be entered.
File Format

You can select the file format.
Encode

You can specify the image encoding method.
You can set the authentication method for users that log
in.
For details, see "Setting user authentication" (page
2-31).
You can initialize the access restrictions set in Message
Board from the machine.
Use this function when you cannot access Message
Board.
You can delete the printers registered in the Scan to
Print Monitor from the machine.
Use this function when the computer using the Scan to
Print Monitor cannot access the machine.
You can initialize the service settings specified in the
machine policy settings of Message Board from the
machine.
Use this function when you cannot access Message
Board.
You can set the communication speed for the LAN that
is connected.
Settings
2-32).
OFF
ON
Not registered
Not registered
TIFF
PDF
MH
MR
MMR
JBIG
Stand-Alone
Single Sign On
Auto
100Mbps - Full Duplex
100Mbps - Half Duplex
10 Mbps - Full Duplex
10 Mbps - Half Duplex