Cleaning The Touch Panel - Konica Minolta bizhub 25e Administrator's Manual

Cleaning the touch panel

When the touch panel is dirty, it may become difficult to operate the machine.
Clean the panel at regular intervals.
1
Confirm the machine is in the energy save mode.
•While the machine is in the energy save mode, the touch panel display is turned off and only
the energy save key illuminates green.
•To turn the energy saving mode on or off, press <Energy Save>.
Touch panel display
2
Wipe the touch panel with a soft cloth.
When the area is extremely dirty, wipe it with a cloth dipped in a small quantity of a mild
cleaning solution, and then wipe it again with a cloth dipped in water and thoroughly wrung
out.
<Energy Save> key
Cleaning 3-7
1
2
3