Administrator Settings (Ip/I-Fax); System Settings - Power Save Setting - Enter Power Save Mode; System Settings - Output Setting - Print/Fax Output Setting - Fax; System Settings - Restrict User Access - Konica Minolta bizhub C360 User Manual

10
10.5

Administrator Settings (IP/I-FAX)

This section describes administrator settings that are configured for Internet Fax and IP Address Fax.
10.5.1

System Settings - Power Save Setting - Enter Power Save Mode

d
Reference
For the setting procedure, refer to page 10-14.
10.5.2

System Settings - Output Setting - Print/Fax Output Setting - Fax

d
Reference
For the setting procedure, refer to page 10-14.
10.5.3

System Settings - Restrict User Access

Restrict Access to Job Settings - Registering and Changing Addresses

d
Reference
For the setting procedure, refer to page 10-9.

Restrict Access to Job Settings - Change the "From" Address

The From address is used for the address configured for the device.
d
Reference
For the setting procedure, refer to page 10-9.

Restrict Operation - Restrict Broadcasting

d
Reference
For the setting procedure, refer to page 10-10.
10.5.4

System Settings - Stamp Settings - Fax TX Settings

d
Reference
For the setting procedure, refer to page 10-15.
10.5.5 System Settings - Advanced Preview Setting - Original direction setting dis-
play
d
Reference
For the setting procedure, refer to page 10-12.
10.5.6

Fax Settings - Header Information

Reference
- For Internet Fax or IP Address Fax, sender information is not available for [Outside Body Text]. Even if
[Outside Body Text] is selected, sender information is added to the inside of the original.
d
Reference
For the setting procedure, refer to page 10-15.
10-34
Administrator Settings (IP/I-FAX)
bizhub C360/C280/C220 (Version 4)
10.5