Other Messages; Garo Wxxxx (X Represents A Number); Error Exxx-Xxxx (X Represents A Letter Or Number); Hardware Error. Xxxxxxxx-Xxxx (X Represents A Letter Or Number) - Canon imagePROGRAF iPF825 MFP M40 User Manual

Other Messages

GARO Wxxxx (x represents a number) ........................................................................................................... 913

ERROR Exxx-xxxx (x represents a letter or number) ...................................................................................... 913

Hardware error. xxxxxxxx-xxxx (x represents a letter or number) ................................................................... 913

Top cover is open. ........................................................................................................................................... 914
Prepare for parts replacement. ........................................................................................................................ 914
Parts replacement time has passed. ............................................................................................................... 914
Unknown file. ................................................................................................................................................... 914
Multi-sensor error ............................................................................................................................................ 915
GARO Wxxxx (x represents a number)
Cause
There is a problem with the print job.
ERROR Exxx-xxxx (x represents a letter or number)
Cause
An error requiring service may have occurred.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
The last portion of roll paper was used during a print job. The
paper was not advanced because the trailing edge is taped to
the roll.
Fastening tape or the Belt Stopper has not been removed in-
side the Top Cover.
An error requiring service may have occurred.
iPF825
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
Write down the error code and message, turn off the printer, and con-
tact your Canon dealer for assistance.
Cause
Error Message
Corrective Action
Corrective Action
Corrective Action
Turn off the printer and remove the roll from the print-
er before restoring power.
Turn off the printer, open the Top Cover and remove
the tape or the Belt Stopper before restoring power.
Turn off the printer and wait at least three seconds be-
fore restoring the power.
GARO Wxxxx (x represents a number)
> Other Messages >
13
913