Canon imagePROGRAF iPF825 MFP M40 User Manual page 732

Printer Parts > Control Panel
2.
Press ▲ or ▼ to select TCP/IP, and then press the ▶ button.
3.
Press ▲ or ▼ to select IP Setting, and then press the ▶ button.
4.
Press ▲ or ▼ to select IP Address, and then press the ▶ button.
5.
Press ◀ or ▶ to move the cursor (_) to each field for entering numbers.
6.
Press ▲ or ▼ to enter the number, and then press the OK button.
7.
Repeat steps 5 and 6 to continue entering numbers.
9
8.
Press the Online button to bring the printer online.
Executing menu commands
Follow these steps to execute menu commands.
1.
Press ▲ or ▼ to select a menu, and then press the ▶ button.
Repeat these steps until the desired menu options are displayed.
716
Main Menu Operations
>
Note
• Hold down ▲ or ▼ to increase or decrease the value continuously.
• Make sure the IP address you enter for the printer is not the same as any computer IP address in your
network.
Note
• If a confirmation message is displayed regarding the setting you entered, press the OK button. The
setting is applied, and the printer goes online.
iPF825