Configuring The Destination For Bonjour Network - Canon imagePROGRAF iPF825 MFP M40 User Manual

Network Setting
7.
Make sure the printer has been added, and then close the Printer List window.
Important
• If imagePROGRAF Generic is indicated in Kind, the printer information is not properly acquired. Make
sure the printer is on and connected to the network. (See "Cannot connect the printer to the network.")
→P.873

Configuring the Destination for Bonjour Network

In Mac OS X 10.2.8 and later, use Bonjour functions to easily connect the printer to the network. Follow the steps below to
configure the destination if you use the printer on TCP/IP network.
Important
• Bonjour and IP Print (Auto) do not support printing to a printer on other network groups that require a rout-
er for connection. Make sure the computer and printer are on the same network. For information about net-
work settings, ask your network administrator.
10
• By default, Bonjour is activated on the printer. The printer name as displayed in Printer Setup Utility (or
Print Center ) in Mac OS X is predefined as the Multicast DNS Service Name. You can activate or deacti-
vate the Bonjour function or change the printer name by using RemoteUI. For instructions on changing it, see
"Using RemoteUI."
1.
Choose Utilities (or Applications ) in the Go menu of Finder.
2.
Click Printer Setup Utility (or Print Center ) in the Utilities folder.
3.
If the printer name is not displayed in Printer List, click Add.
796
Configuring the Destination for Bonjour Network
> Network Setting (Mac OS X)
→P.772
>
iPF825