End Of Paper Feed; Rel Lever Is In Wrong Position; Borderless Printng Not Possible - Canon imagePROGRAF iPF825 MFP M40 User Manual

Error Message >
The Cutter Unit stops in
the middle of cutting.
In other cases, the Cutter
Unit may be damaged.

End of paper feed.

You are pressing the ▲ button on the Control Panel and trying to rewind the roll to the edge.

Rel lever is in wrong position.

Cause
The Release Lever is up.

Borderless printng not possible.

"Lift release lever and reload the paper."
Because paper expands or con-
tracts depending on the environ-
ment of use, it may become nar-
rower or wider than the suppor-
ted width for borderless printing.
The paper is loaded askew.
13
"Check supported paper."
898
The print job received specifies a type
or width of paper that is not compatible
with borderless printing.
End of paper feed.
Messages regarding paper >
Cause
(See "Specifying the Cutting Method for Rolls.")
Contact your Canon dealer for assistance.
Lower the Release Lever.
If the error occurs again, turn off the printer and wait a while before restoring power.
Cause
Hold down the Stop button for a second or more to cancel printing.
Use each type of paper only where the recommended environmental conditions are
met. For details on environmental conditions for various paper, see the Paper Ref-
erence Guide.
(See "Types of Paper.")
Lift the Release Lever and straighten the paper so that the edge of the paper is in
the width of the ink groove for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.
(See "Attaching the Roll Holder to Rolls.")
If you press the Online button and continue printing, the document will be printed
with a border.
Cause
Corrective Action
Cause
Corrective Action
Corrective Action
→P.623
Corrective Action
Follow these steps to change the settings of the print job to enable border-
less printing.
1. Hold down the Stop button for a second or more to cancel printing.
2. Make sure the correct printer driver for the printer is selected and try
printing again.
For information on types of paper compatible with borderless printing,
refer to the Paper Reference Guide.
→P.654
Corrective Action
Release the ▲ button.
→P.629
iPF825