Loading Rolls In The Printer - Canon imagePROGRAF iPF825 MFP M40 User Manual

Handling Paper >

Loading Rolls in the Printer

Follow these steps to load rolls in the printer.
You can load rolls in two positions, in the Roll 1 (Upper) and Roll 2 (Lower) holders.
Note
• Remove any loaded paper that will not be used.
• Rolls (See "Removing the Roll from the Printer.")
• Sheets (See "Removing Sheets.")
• If the Wheeled Output Stacker is installed, remove it in advance. (See "Using the Wheeled Output Stack-
er.")
• If the Platen is dirty, clean inside the Top Cover. (See "Cleaning Inside the Top Cover.")
• After pressing the Load/Eject button, you can refer to instructions on the Display Screen as you load the
paper. (See "Checking Instructions During Printer Operations.")
Loading rolls in the Roll 1 (Upper) holder
1.
Confirm that a roll is selected as the paper source. (See "Selecting the Paper Source.")
7
2.
Open the Top Cover and lift the Ejection Guide.
634

Loading Rolls in the Printer

Handling rolls >
→P.671
→P.644
→P.669
→P.833
→P.751
→P.641
iPF825