Canon imagePROGRAF iPF825 MFP M40 User Manual page 752

Large format printer
Hide thumbs Also See for imagePROGRAF iPF825 MFP M40:
Table of Contents

Advertisement

Printer Parts
>
Control Panel
Quality Man-
ager
Paper Manag-
er
9
Line & Pen
Manager
736
Main Menu Settings
>
Setting Item
Print Quality
Input Resolution
Print (Economy)
Paper Source
Margin
Conserve Paper
Auto Rotate
Nesting
Use Nesting
Nesting Wait-
Time
Cut Lines
Enable merge
Pen Setup
Select Palette
Define Palette
Description, Instructions
Choose the print quality.
Choose the printer input resolution, 600dpi or 300dpi.
Although printing quality is diminished, less ink is con-
sumed than in regular printing. Select On to conserve ink.
Choose the source of paper for HP-GL/2 printing.
Specify the margin around paper. The margin for the trailing
edge of sheets is 23 mm (0.9 in).
However, if you have specified the leading margin in Paper
Details, the value in Paper Details has priority.
Conserves paper when printing.
If the long side of an original is shorter than the roll width,
the original is automatically rotated 90 degrees to conserve
paper. Similarly, if the long side of an original in landscape
orientation is longer than the roll width and the short side is
shorter than the roll width, the original is repositioned to fit
on the paper.
HP RTL print jobs are not rotated. Because HP RTL images
are not rotated even if the paper is rotated 90 degrees, images
may be cut off or the blank paper may be ejected. In this
case, set Auto Rotate to Off.
Selecting On will store print jobs until multiple documents
can be arranged to fill up the roll width, instead of printing
each print job as it is received.
Specify a time to wait until printing, as desired.
Select On to print cut lines between each document on the
roll.
Specify whether to merge or print over colors where lines
overlap.
Choose Off to print the second line over the first. Choose On
to merge all overlapping colors.
As pen values, choose Software, Palette A, Palette B, or
Factory.
Choose Software to print according to software settings.
Choose Palette A or Palette B to print using the value speci-
fied in Define Palette.
Specify the Width, Color, and Line Attributes in the pa-
lette Pen no.. Choose Factory to confirm the values when
Factory is selected in Select Palette.
In Line Attributes, choose No Setting or Circle Setting as
the processing for the ends and junctions of lines.
If you choose No Setting
iPF825

Advertisement

Table of Contents
loading

Table of Contents