Auto-Negotiate All; Bridge Aging-Time - Dell Force10 S2410-01-10GE-24P Command Reference Manual

The no version of this command disables automatic speed negotiation on a port.
Mode
Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as
(conf-if-range-vlan 10-20)#.
Command
Version 2.3
History
Related interface range
Commands
speed

auto-negotiate all

This command enables automatic speed negotiation on all ports. The default value is enable.
The no version of this command disables automatic speed negotiation on all ports.
[no] auto-negotiate all
Syntax
Mode Global Config
Related
interface range
Commands
speed all

bridge aging-time

This command configures the forwarding database address aging timeout in seconds. In an SVL
system, the [fdbid/all] parameter is not used and will be ignored if entered.
bridge aging-time seconds
Syntax
The command no bridge aging-time sets the forwarding database address aging timeout to the
default of 300 seconds.In an SVL system, the [fdbid/all] parameter is not used and will be ignored if
entered.
Parameters seconds
Default 300
Mode
Global Config In an SVL system, the [fdbid/all] parameter is not used and will be ignored if entered.
Command
Version 2.3
History
Interface Range mode added
Defines an interface range and accesses the Interface Range mode
Manually set the port speed.
Defines an interface range and accesses the Interface Range mode
Manually set the same port speed for all ports.
seconds
In place of
the number of seconds before the timeout.
Modified: Removed parameters and statements relating to IVL.
, enter a number between 10 and 1,000,000 to indicate
System Configuration Commands | 89